
Home / Locations
Touch foil near you
Touch foil locations and city guides
Touch foil turns a storefront window, glass wall or acrylic panel into a touch screen. Find the planning guide for your city below, or call 888-631-5880 for a quote.
How it works anywhere
One product, planned for your building
Touch foil is a transparent film that mounts on the inside of glass or acrylic and senses fingers through that surface. The controller board and USB cable are included, and it runs on 5 V USB power, so it plugs into the computer that drives your display. You can build with a screen behind the glass (an LCD, LED or high-brightness monitor) or with rear-projection film and a projector, where the glass itself becomes the screen.
The city guides below cover what changes from place to place: the kinds of storefronts, lobbies, museums and venues where interactive glass gets used, how sun and viewing distance affect the screen you pair with the foil, and what to check with your building before you start. The product and the install steps stay the same everywhere. The foil is wet-applied to clean glass, lined up with the screen edges, squeegeed free of water and bubbles, and left 24 to 48 hours to dry before use.
A few rules apply in every city. The glass must have no metal parts in it, thinner glass gives better touch, and metal should stay at least 3 mm from the foil. A foil is a one-time install, so test the layout before you apply it. Every touch foil carries a 3-year warranty on the foil and a 1-year warranty on the controller, and products are CE and RoHS compliant.
Don’t see your city? Touch foil is sold by Screen Solutions International (SSI) in Rocklin, California. Call 888-631-5880 or email ssisales@ssidisplays.com, or request a quote with your glass size and the screen you plan to use. See touch foil uses, touch foil models and how touch foil works for more.
Cities we serve