
Touch kiosks
Kiosk touch, behind a pane of glass.
Build a touch kiosk with the screen fully protected. Touch foil goes on the inside of the kiosk glass, so people touch the glass and never the display.
Why foil in a kiosk
The glass takes the touches.
Many kiosks put an exposed touch screen where anyone can press, scratch or spill on it. With touch foil, the kiosk front is a sheet of glass or acrylic and the touch sensor is laminated behind it. The display, the foil and the cable all sit inside the cabinet.
It is a neat way to turn an ordinary display into a touch kiosk: any LCD or high-brightness monitor of the right size can sit behind the glass.
- Display and sensor protected behind the glass
- Use the monitor you choose, at the size you need
- Adhesive mounting is ideal for kiosks and tables
- One USB cable to the kiosk computer

Recommended
Picking a foil for a kiosk
Most kiosks
ProFoil Standard: 10 touch points, 10.1–55″, best value.
Big or shared screens
Pro Touch 20 / 40 for larger screens used by several people.
Small control panels
ProFoil Clear starts at 2″ and has no visible wires.
Build tips
Getting the details right
- Keep metal parts at least 3 mm away from the foil.
- Fix the controller board to the cabinet and ground it to the frame.
- Route the USB cable away from power and display cables to avoid interference.
- Use a grounded power supply for the kiosk.
More in How it works and the guides and FAQ.
Building a kiosk?
Send the screen size and kiosk glass and we will match a foil.