
Touch foil is a transparent film with a fine grid of sensing wires that mounts on the inside of a pane of glass or acrylic. Once it is connected, it senses fingers through the glass, so an ordinary window, glass wall or tabletop works like a multi-touch screen. Nothing touch-sensitive sits on the outside of the glass, which keeps the electronics protected and the surface easy to clean.
What comes in the box
Each foil ships with its controller board and a USB cable. The controller is powered by 5 V over USB and is plug-and-play, so the computer driving the display sees it as a touch screen without extra hardware. The foil is the touch layer only; the picture comes from a display or projector behind the glass.
Two ways to build a touch glass display
- Foil + glass + LCD or LED display + computer. The display sits behind the glass and the foil sits on the inside face of the glass in front of it. This suits kiosks, lobby walls and window displays with a fixed screen size.
- Foil + glass + rear-projection film + projector + computer. A projector throws the image onto rear-projection film on the glass, and the foil adds touch. This suits large or unusually shaped images and windows where a flat-panel display would be too heavy.
The How It Works page walks through both builds step by step.
The ProFoil range at a glance
- ProFoil Standard: 10 touch points through glass up to 10 mm, sizes from 10.1 to 55 inch, automatic calibration.
- ProFoil Pro Touch 20 / 40: 10 points under 32 inch, 20 or 40 points from 32 inch up, through glass up to 12 mm including laminated double glass with no air gap, 10.1 to 100 inch.
- ProFoil Object Recognition: 40+ touch points, 43 to 75 inch, and it recognises marker pucks placed on the glass (5 per set, expandable to 13).
- ProFoil Clear: fully transparent with no visible wires, 2 to 98 inch, supplied laminated on glass.
- Circular Touch Foil: for round tables and domes, up to 140 cm active diameter; two halves join to 280 cm.
Custom sizes up to 1.4 x 4.5 m are available. Full figures are on Sizes and Specs.
How it performs
Touch accuracy is about plus or minus 2 mm (under 1 mm on Object Recognition), and the response is under 10 ms, so taps and swipes feel immediate. Light transmission is 89 percent or more (85 percent or more on ProFoil Clear), so the picture behind the glass stays bright. The foils are CE and RoHS compliant, and every foil carries a 3-year warranty, with 1 year on the controller.
Where people use it
Common projects include interactive storefront windows, information kiosks, touch tables in museums and visitor centers, displays behind glass in lobbies, and rear-projection touch glass in showrooms. The Uses page has more examples.
Before you order
- Check the glass: it must have no metal in it, and thinner glass gives better touch. Keep metal at least 3 mm from the foil.
- Measure the visible screen area so the foil’s marked active area can line up with the screen edges.
- Plan grounded power, a place to fix and ground the controller, and a USB route away from power and display cables.
- Remember the foil is a one-time install: it is wet-applied, dries in 24 to 48 hours and cannot be moved to another pane, so test the layout first.
Every project is quoted to its size and glass. Get a quote with your glass type, thickness and screen size, or call SSI on 888-631-5880.
Planning a touch project?
Tell us about your glass and screen and we will recommend a foil.